- Standard panel size of 1200mm (width) x 3000mm (height) x Custom Thickness in mm
- Custom sizes available in 2700mm, 2400mm or as required
- Electro-welded high tensile steel wire mesh on both sides of the EPS core which acts in composite with the shotcrete to perform as a stress-skin panel capable of bearing both axial and lateral wall loads
- 3.0mm high tensile steel wire @ 70mm spacing transversely and 2.5mm high tensile steel wire @ 100mm spacing longitudinally.
- EPS density >15kg/m3
- Panel weight is approximately 15kg
- Max. Wall thickness of 150mm with shotcrete of 35mm on both sides
Features
- Standard panel size of 1200mm (width) x 3000mm (height) x Custom Thickness in mm
- Standard thickness is 80mm for load-bearing panels and 60mm for partition panel
- Available in lengths of 2700mm; 2400mm; 3,000mm or as required.
- Electro-welded high tensile steel wire mesh on both sides of the EPS core which acts in composite with the shotcrete to perform as a stress-skin panel capable of bearing both axial and lateral wall loads
- 3.0mm high tensile steel wire @ 70mm spacing transversely and 2.5mm high tensile steel wire @ 100mm spacing longitudinally.
- EPS density >15kg/m3
- Panel weight is approximately 15kg
- Max. Wall thickness of 150mm with shotcrete of 35mm on both sides
Ideal For
- Load bearing walls (internal or external) when shotcreted
- Non-load bearing partition walls (internal) when plastered
Axial Load Carrying Capacities of different shotcrete thicknesses for 80mm thk wall panel
Shotcrete Thickness (mm)
20
25
30
35
Wall thickness (mm)
120
130
140
150
Max. Axial Load (KN/m)
202.3
237.3
272.3
307.3
# storeys it can support
2
3
4
5
NOTE:
- Shotcrete compressive strength at 28 days is assumed to be min. 20N/mm2.
- A factor of safety of 2.0 has been factored in the calculation of the max. axial load.
A typical floor load of 75KN/m has been assumed in the computation of number of storeys an EPS wall can support.